HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 177
4 - CONFIGURATION-MODE
C
OMMANDS
The no command option resets the value to the default value.
Syntax [no] radius-server timeout <seconds>
Parameters
Example
minna (config) # radius-server timeout 30
minna (config) #
service connection pooling
Description Enables a pool of connections to a peer HP EFS WAN Accelerator. Connection
pooling enables you to save an extra round-trip for the initial connection setup.
Connection pooling is useful for protocols which open a number of short lived
connections, such as Hypertext Transport Protocol (HTTP).
The no command option disables connection pooling.
NOTE: Any change in the connection pooling parameter requires you to restart the HP EFS
WAN Accelerator service.
Syntax [no] service connection pooling <addr> <value>
Parameters
minna (config) # service connection pooling 10.0.0.1 10
minna (config) #
service default-port
Description Sets the default service port you want to use for connection pooling.
Syntax service default-port <port>
Parameters
<seconds> Sets the timeout for retransmitting a request to any RADIUS
server. The range is 1-60. The default value is 3.
<addr> Specifies the IP address of the peer HP EFS WAN Accelerator. The IP
address of 0.0.0.0 identifies the group of all HP EFS WAN Accelerator
peers.
<value> Specifies the connection pooling value for the HP EFS WAN Accelerator
peer. The default value is 20.
<port> Specifies the new port.