HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

198 4 - CONFIGURATION-MODE COMMANDS
Example minna (config) # wccp 999 routers 10.0.0.0
minna (config) #
web auto-logout
Description Sets the number of minutes before the HP EFS WAN Accelerator Manager
automatically logs out the user.
The no command option disables the automatic log out feature.
Syntax [no] web auto-logout <minutes>
Parameters
Example
minna (config) # web auto-logout 20
minna (config) #
web enable
Description Enables the HP EFS WAN Accelerator Manager. The default value is true.
The no command option disables the HP EFS WAN Accelerator Manager.
Syntax [no] web enable
Parameters None
Example
minna (config) # web enable
minna (config) #
priority <priority> Specifies the WCCP priority for traffic redirection. If a connection
matches multiple service groups on a router, the router chooses the
service group with the highest priority. The range is 0-255. The
default value is 200.
password
<password>
Specifies the WCCP password. This password must be the same as
the password on the router. (WCCP requires that all routers in a
service group have the same password.) Passwords are limited to
eight characters.
weight <weight> Specifies how often the traffic is redirected to a particular HP EFS
WAN Accelerator. A higher weight redirects more traffic to that HP
EFS WAN Accelerator. The ratio of traffic redirected to an HP EFS
WAN Accelerator is equal to its weight divided by the sum of the
weights of all the HP EFS WAN Accelerators in the same service
group. For example, if there are two HP EFS WAN Accelerators in a
service group and one has a weight of 100 and the other has a weight
of 200, the one with the weight 100 receives 1/3 of the traffic and the
other receives 2/3 of the traffic. The range is 0-65535. The default
value corresponds to the number of TCP connections your appliance
supports.
<minutes> Specifies the number of minutes before the system automatically logs out
the user.
The default value is 15 minutes.