HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

22 1 - USING THE COMMAND-LINE INTERFACE
Saving Configuration Changes
The show configuration running command displays the current configuration of the
system. When you make a configuration change to the system, the change becomes
part of the running configuration.
The change does not automatically become part of the configuration file in memory
until you write the file to memory and disk. If you do not save your changes to memory
and disk, they are lost when the system restarts.
To save all configuration changes permanently, you must enter the write memory
command while in configuration mode.