HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)
HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 23
2 - USER-MODE COMMANDS
CHAPTER 2 User-Mode Commands
In This Chapter This chapter is a reference for user-mode commands. User-mode commands allow you
to enter enable mode and perform standard network monitoring tasks.
To enter user mode • Connect to the CLI. For detailed information, see “Connecting to the CLI” on
page 19.
This chapter describes the following user-mode commands:
“enable,” next
“exit” on page 23
“ping” on page 24
“traceroute” on page 24
enable
Description Enters enable mode.
Syntax enable
Parameters None
Example
minna > enable
minna #
exit
Description Exits the CLI when in user mode; exits enable mode when in enable mode; exits
configuration mode when in configuration mode.
Syntax exit
Parameters None
Example
minna (config) # exit
minna #