HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

32 3 - ENABLE-MODE COMMANDS
Syntax reload [clean [halt] | halt | force]
Parameters
Example
minna # reload
The session will close. It takes about 2-3 minutes to reboot the
appliance.
restart
Description Restarts the HP EFS WAN Accelerator service. If the clean option is specified, the
data store is cleared before restart occurs.
Syntax restart [clean]
Parameters
Example
minna # restart
Terminating the process....
Relaunching the process.
show aaa
Description Displays the authentication methods used for log in.
Syntax show aaa
Parameters None
Example
minna # show aaa
AAA authorization:
Default User: admin
Map Order: remote-first
Authentication method(s):
local
show arp
Description Displays the contents of the Address Resolution Protocol (ARP) cache. The ARP
cache contains all of the statically-configured ARP entries as well as any that the
system has acquired dynamically.
clean [halt] Clears the data store and reboots or shuts down the system. The reload
clean halt command clears the data store and shuts down the system.
halt Shuts down the system.
force Clears the data store, then reboots or shuts down the system.
clean Clears the data store before rebooting the system.