HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 45
3 - ENABLE-MODE COMMANDS
show interfaces
Description Displays the running state settings (The set of settings and statistics displayed varies
when using DHCP) and statistics.
Syntax show interfaces [<interface name>] | [brief | configured]
Parameters
Example
minna # show interfaces
Interface lo state
Up: yes
IP address: 127.0.0.1
Netmask: 255.0.0.0
Speed:
Duplex:
Interface type: loopback
MTU: 16436
HW address: XX:XX:XX:XX:XX
RX bytes: 656
RX packets: 12
RX mcast packets: 0
RX discards: 0
RX errors: 0
RX overruns: 0
RX frame: 0
TX bytes: 656
TX packets: 12
TX discards: 0
TX errors: 0
TX overruns: 0
TX carrier: 0
TX collisions: 0
Interface primary state
Up: yes
IP address: 10.0.0.3
Netmask: 255.255.0.0
Speed: 100Mb/s (auto)
Duplex: full (auto)
Interface type: ethernet
MTU: 1500
HW address: 00:E0:81:52:0E:20
RX bytes: 576490
RX packets: 7454
RX mcast packets: 0
RX discards: 0
RX errors: 0
RX overruns: 0
RX frame: 0
TX bytes: 63464
TX packets: 559
TX discards: 0
TX errors: 0
TX overruns: 0
<interface name> Specifies the interface name. For example, aux, lan0_0, wan0_0,
primary, in-path0_0, lo
brief Displays the running state settings without statistics.
configured Displays configured settings for the interface.