HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

46 3 - ENABLE-MODE COMMANDS
TX carrier: 0
TX collisions: 0
Interface aux state
Up: yes
IP address:
Netmask:
Speed: UNKNOWN
Duplex: UNKNOWN
Interface type: ethernet
MTU: 1500
HW address: 00:E0:81:52:0E:21
RX bytes: 0
RX packets: 0
RX mcast packets: 0
RX discards: 0
RX errors: 0
RX overruns: 0
RX frame: 0
TX bytes: 0
TX packets: 0
TX discards: 0
TX errors: 0
TX overruns: 0
TX carrier: 0
TX collisions: 0
show ip
Description Displays Internet Protocol (IP) settings.
Syntax show ip {default gateway [static] |in-path route <interface> in-pathgateway
<interface> route [static]}
Parameters
Example
minna # show ip route
Destination Mask Gateway
10.0.0.0 255.255.0.0 0.0.0.0
default 0.0.0.0 10.0.0.1
minna #
show ip flow-export
Description Displays NetFlow settings.
Syntax show ip flow-export
default gateway
[static]
Displays the default gateway or static default gateway.
in-path route
<interface>
Displays in-path route settings for inpath0_0, inpath1_1, and so forth.
in-path-gateway
<interface>
Displays in-path gateway settings for inpath0_0, inpath1_1, and so
forth.
route [static] Displays the IP route or IP static route.