HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 57
3 - ENABLE-MODE COMMANDS
Parameters
Example
minna # show protocol nfs
Global:
NFS Enabled: yes
V2/V4 Alarm Enabled: yes
Memory Soft Limit: 10000000
Memory Hard Limit: 12000000
Max Directory Count: 5242880 bytes
Max Symlink Count: 524288 bytes
Default NFS Server Settings:
Policy: Global Read-Write
Default NFS Volume Settings:
Policy: Global Read-Write
show qos classification
Description Shows Quality of Service (QoS) classification settings.
Syntax show qos classification [classes | rules]
Parameters
Example
minna # show qos classification
QoS Settings (QoS Enabled)
Interface Burst (kbit) LinkRate (kbps)
--------- ------------ ---------------
wan0_0 2500 10000
show qos dscp rules
Description Displays QoS Differentiated Services Code Point (DSCP) rules.
Syntax show qos dscp rules
Parameters None
server <name>
{full|
lookup-volumes|
volume id <fsid>}
Displays information for the NFS server specified by <name>.
You can specify the following levels of detail:
• full. Displays full details.
• lookup-volumes. Displays a list of NFS server volumes that
have been exported.
• volume id <fsid>. Displays details for the NFS server volume.
servers {full} Displays NFS server settings.
classes Displays QoS classification class settings.
rules Displays QoS classification rules.