HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 87
4 - CONFIGURATION-MODE
C
OMMANDS
Example minna (config) # configuration jump-start
Configuration wizard.
Step 1: Hostname? [minna]
Step 2: Use DHCP on primary interface? [no]
Step 3: Primary IP address? [10.10.10.6]
Step 4: Netmask? [255.255.0.0]
Step 5: Default gateway? [10.0.0.1]
Step 6: Primary DNS server? [10.0.0.2]
Step 7: Domain name? [example.com]
Step 8: Admin password?
Step 9: SMTP server? [natoma]
Step 10: Notification email address? [[e-mail]]
Step 11: Set the primary interface speed? [auto]
Step 12: Set the primary interface duplex? [auto]
Step 13: Would you like to activate the in-path configuration? [yes]
Step 14: In-Path IP address? [10.11.11.6]
Step 15: In-Path Netmask? [255.255.0.0]
Step 16: In-Path Default gateway?
Step 17: Set the in-path:LAN interface speed? [auto]
Step 18: Set the in-path:LAN interface duplex? [auto]
Step 19: Set the in-path:WAN interface speed? [auto]
Step 20: Set the in-path:WAN interface duplex? [auto]
You have entered the following information:
1. Hostname: minna
2. Use DHCP on primary interface: no
3. Primary IP address: 10.10.10.6
4. Netmask: 255.255.0.0
5. Default gateway: 10.0.0.1
6. Primary DNS server: 10.0.0.2
7. Domain name: example.com
8. Admin password: (unchanged)
9. SMTP server: natoma
10. Notification email address: [e-mail]
11. Set the primary interface speed: auto
12. Set the primary interface duplex: auto
13. Would you like to activate the in-path configuration: yes
14. In-Path IP address: 10.11.11.6
15. In-Path Netmask: 255.255.0.0
16. In-Path Default gateway:
17. Set the in-path:LAN interface speed: auto
18. Set the in-path:LAN interface duplex: auto
19. Set the in-path:WAN interface speed: auto
20. Set the in-path:WAN interface duplex: auto
To change an answer, enter the step number to return to.
Otherwise hit <enter> to save changes and exit.
Choice:
configuration merge
Description Merges common configuration settings from one HP EFS WAN Accelerator to
another. Use the configuration merge command to deploy a network of appliances.
Set up a template HP EFS WAN Accelerator and merge the template with each HP
EFS WAN Accelerator in the network.
The following configuration settings are not merged when you run the configuration
merge command: failover settings, Simple Network Management Protocol (SNMP)
SysContact and SysLocation, log settings, and all network settings (for example, host
name, auxiliary interface, DNS settings, defined hosts, static routing, and in-path
routing).