HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 91
4 - CONFIGURATION-MODE
C
OMMANDS
Syntax [no] datastore notification wrap-around <days>
Parameters
Example
minna (config) # datastore notification wrap-around 2
minna (config) #
datastore receive port
Description Receives the data store from another HP EFS WAN Accelerator.
Syntax datastore receive port <port>
Parameters
Example
minna (config) # datastore receive port 2202
minna (config) #
datastore send addr
Description Copies the data store to another HP EFS WAN Accelerator.
Syntax datastore send addr <addr>
Parameters
Example
minna (config) # datastore send addr 10.0.0.2
minna (config) #
datastore sync enable
Description Enables automatic data store synchronization. Automatic data store synchronization
replicates the data store from an active HP EFS WAN Accelerator to a passive HP
EFS WAN Accelerator without disrupting operations. Data store synchronization
ensures that a warm data store exists on the backup HP EFS WAN Accelerator. With
a warm data store, the backup HP EFS WAN Accelerator can perform as optimally as
its master when it is activated; that is, it performs as if it has seen the data before and
only sends new segments across the WAN.
wrap-around <days> Specifies the number of days to elapse before sending an email
message notifying you that the data in the data store has been
replaced.
<port> Specifies the port of the HP EFS WAN Accelerator that will
receive the data store.
<addr> Specifies the IP address of the remote HP EFS WAN Accelerator
from which to send the data store.