HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

94 4 - CONFIGURATION-MODE COMMANDS
IMPORTANT: This must be the primary IP address of the backup HP EFS WAN Accelerator.
Syntax datastore sync peer-ip <addr>
Parameters
Example
minna (config) # datastore sync peer-ip 10.0.0.3
minna (config) #
datastore sync port
Description Sets the port for the peer HP EFS WAN Accelerator for which you want to push
replicated data.
Syntax datastore sync port <port>
Parameters
Example
minna (config) # datastore sync port 1234
minna (config) #
datastore sync reconnect
Description Sets the reconnection interval for data store synchronization.
The no command option resets the reconnection interval to the default.
Syntax [no] datastore sync reconnect <seconds>
Parameters
Example
minna (config) # datastore sync reconnect 40
minna (config) #
datastore sync server
Description Sets the data store synchronization server.
<addr> Specifies the primary IP address of the backup HP EFS WAN Accelerator.
<port> Specifies the port of the peer HP EFS WAN Accelerator. The default value
is 7744.
<seconds> Specifies the number of seconds for the reconnection interval. The default
value is 30.