HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 97
4 - CONFIGURATION-MODE
C
OMMANDS
email send-test
Description Sends test email to all configured event and failure recipients.
Syntax email send-test
Parameters None
Example
minna (config) # email send-test
minna (config) #
failover buddy addr
Description Sets the failover IP address. The failover HP EFS WAN Accelerator is the backup HP
EFS WAN Accelerator. If the master HP EFS WAN Accelerator fails, the failover HP
EFS WAN Accelerator takes over. The default value is 0.0.0.0.
IMPORTANT: If you have multiple bypass cards installed in your HP EFS WAN Accelerator
you must specify the inpath0_0 interface for the in-path IP address.
The no command option resets the failover IP address to the default value.
Syntax [no] failover buddy addr <addr>
Parameters
Example
minna (config) # failover buddy addr 10.10.10.1
minna (config) #
failover buddy port
Description Sets the buddy, failover port. The buddy HP EFS WAN Accelerator is the failover
(backup) HP EFS WAN Accelerator. If the master HP EFS WAN Accelerator fails,
the failover HP EFS WAN Accelerator takes over. The default value is 7820.
The no command option resets the buddy, failover port to the default value.
Syntax [no] failover buddy port <port>
Parameters
<addr> Specifies the IP address for the failover, backup appliance.The default
value is 0.0.0.0.
NOTE: If you have multiple bypass cards installed in your HP EFS WAN
Accelerator you must specify the inpath0_0 interface for the in-path IP
address.
<port> Specifies the port number.