HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)

2.14 NAME 109

Each FSE command communicates with the FSE processes through the Manage-

ment Interface (fse–mif). To execute an FSE command, the Management Interface

must be running. If the connection to the Management Interface fails, check its

status by running the fse status command. In case the Management Interface is

not running, start it with the fse – –start command.

After successful command execution fsesystem notiﬁes the FSE administrator

with a suitable message, which is printed to the standard output stream (stdout).

If there was an error during the command execution, an appropriate error message

is printed to the standard error stream (stderr).

STATUS INFORMATION Status information that is printed using the – –

status option is the following:

• number of conﬁgured FSE partitions,

• total number of currently running administrative jobs on all FSE partitions.

For each conﬁgured FSE partition the following information is printed:

• current partition status (ready, disabled, recovery mode, mounted, error, un-

known),

• number of currently running jobs on the partition (excluding administrative

jobs),

• fully–qualiﬁed domain name (FQDN) of the machine that hosts the parti-

tion,

• mount point of the HSM ﬁle system that belongs to the partition.

Partition states have the following meaning:

-------------------------------------------------------------------

-------------------------------------------------------------------

HP StorageWorks File System Extender Software CLI reference