HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)

2.14 NAME 111

the status information that is printed with the help of this option, see section

STATUS INFORMATION.

• – –enable–dbg

Enable debugging or change current settings for debugging of FSE pro-

cesses according to the SysDbgLevel argument and the SysDbgFile, Sys-

DbgFlags and SysDbgHSMFS arguments, if they are speciﬁed by the FSE

administrator. Usage of this option overrides current debugging settings in

FSE tracing conﬁguration ﬁle (see section FILES), but its effect is limited

to the period of time until FSE processes are stopped with the fse command

(current FSE session). After the processes are restarted, the settings in FSE

tracing conﬁguration ﬁle apply.

Note:

Usage of this option has no effect on debugging of the currently running

Back End Agents. However, it has an effect on debugging of the Back

End Agents which will be started later in current FSE session.

• SysDbgLevel

Debugging level identiﬁer whose value can be one of the following upper-

case letters: L, N, A or D. The letters have the following meaning:

– L .......... Low debugging level. Specify that only the most important

information should be logged in FSE debug ﬁles. This level of logging

causes practically no debugging overhead and produces small debug

ﬁles.

– N .......... Normal debugging level. Specify that information which is

most frequently used for debugging should be logged.

– A .......... API debugging level. Specify that besides the most fre-

quently used debugging information all API calls to third–party com-

ponents (omniORB/CORBA, Firebird SuperServer) in the FSE imple-

mentation should be logged.

– D .......... Detailed debugging level. Specify that all details of the FSE

processes should be logged. This level of logging causes a noticeable

debugging overhead and produces a lot of debug output. This argu-

ment can only be used in combination with the – –enable–dbg option.

HP StorageWorks File System Extender Software CLI reference