HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)

2.14 NAME 113
– V .......... Verbose third–party debugging.
This argument can only be used in combination with the SysDbgFile argu-
ment. If it is not used, no events are logged – only the FSE debug file header
is printed.
• SysDbgHSMFS
HSM file system debugging flags, specified by a positive hexadecimal inte-
ger number of the form 0xNNNNNNNN. These flags enable logging of the
events in the HSM file system filter. The flags and the corresponding events
are the following:
– 0x00000001 .......... main HSM file system filter execution flow.
– 0x00000002 .......... HSM file system filter’s hooking to system func-
tions.
– 0x00000004 .......... virtual file system (VFS) method calls.
– 0x00000008 .......... low level communication between user applica-
tions and HSM file system filter.
– 0x00000010 .......... HSM file system events.
– 0x00000020 .......... read/write/change operations on file HSM at-
tributes.
– 0x00000040 .......... locking.
This argument can only be used in combination with the SysDbgFlags argu-
ment. If it is not used, HSM file system filter event logging is not enabled.
• – –disable–dbg
Disable debugging of FSE processes. Usage of this option overrides current
debugging settings in FSE tracing configuration file (see section FILES),
but its effect is limited to the period of time until FSE processes are stopped
with the fse command (current FSE session). After the processes are
restarted, the settings in FSE tracing configuration file apply.
Note:
Usage of this option has no effect on debugging of the currently running
Back End Agents. However, it has an effect on debugging of the Back
End Agents which will be started later in current FSE session.
HP StorageWorks File System Extender Software CLI reference