HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)
2.1 NAME 12
Windows systems only: Retrieve additional volume information and dis-
play the retrieved data in the ParameterName: ParameterValue format with
each parameter in its own line. The following additional information is re-
ported:
1. Device ... the device string of the device which the volume is linked
to.
Additionally, a more descriptive content is reported for the Status parame-
ter. This option can only be used in combination with the – –list–volumes
option.
2.1.4 EXAMPLES
• Create a mount point for the specified volume and trigger HSM FS filter to
connect to volume device file and start fse–hsm (on Windows systems):
fse – –mount I:\fs02 \\?\Volume{86eec883–a640–11d7–9be3–
00096bb08bc0}\
• Stop fse–hsm and enable Limited Access Mode for the specified volume
(on Windows systems):
fse ––umount c:\emptydir \\?\Volume{d9568629–da27–11d7–bf21–
0050da45607}\
• Disconnect NTFS from the specified volume (on Windows systems):
fse – –dismount–ntfs \\?\Volume{d9568629–da27–11d7–bf21–
0050da45607}\
• Enable Limited Access Mode for the specified volume (on Windows sys-
tems):
fse – –limit–access \\?\Volume{d9568629–da27–11d7–bf21–
0050da45607}\
• Disable Limited Access Mode (switch back to Full Access Mode) for the
specified volume (on Windows systems):
fse – –full–access \\?\Volume{d9568629–da27–11d7–bf21–
0050da45607}\
HP StorageWorks File System Extender Software CLI reference