HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)

2.2 NAME 18

• HSM_LV_VAR = hsm_vg/var

This parameter is obsolete in the current FSE product. It is ignored by the

backup process.

• HSM_LV_PART = hsm_vg/part

This parameter is obsolete in the current FSE product. It is ignored by the

backup process.

• SNAPSHOT_PCT = 10

Size of the LVM logical volume snapshot, expressed in percentage of the

original LVM logical volume size.

If the /etc/opt/fse/backup.cfg ﬁle is not found, default values are used for the cur-

rent FSE backup session.

On Windows systems, the backup conﬁguration ﬁle backup.cfg is obsolete and

ignored by the backup process.

ABORTING THE BACKUP To abort an ongoing FSE backup process, you

need to abort the backup job. In certain cases, aborting the fsebackup command

itself is also required. Perform the steps:

1. Run the fsejob – –abort command to abort the FSE backup job. At the

command line, you must specify the backup job ID. For details, see the

fsejob man page.

2. In the window where fsebackup was invoked, press CTRL+C to abort fse-

backup.

Note:

This step is not required if tape was speciﬁed as the only backup des-

tination, and the FSE backup job was waiting for resources at the mo-

ment you aborted it.

HP StorageWorks File System Extender Software CLI reference