HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)

2.2 NAME 20
• – –nomedia
Do not copy the backup image to tape, but only create backup image file on
disk. This option can only be used in combination with the – –file option,
and cannot be used in combination with the – –medium option.
• –m, – –medium
Perform FSE backup and copy the backup image to tape medium with bar-
code Barcode. Copying will fail if any of the following conditions are true:
– medium does not belong to the backup FSE media pool or does not
exist,
– medium is marked as unreliable or unusable,
– medium does not have enough free storage space for the backup image
(the additional option – –init was not specified),
– medium does not have enough free storage space for the backup im-
age, but could not be initialized for some reason (the additional option
– –init was specified).
If – –medium and Barcode are omitted from the fsebackup invocation, and
the – –nomedia option is not specified, the backup image is copied to the
first available backup FSE medium. This option cannot be used in combi-
nation with the – –nomedia option.
• Barcode
The alphanumeric string that identifies the FSE medium to which the
backup image will be copied.
• –i, – –init
If there is not enough free storage space, initialize the medium with barcode
Barcode before copying the backup image to it. This option can only be
used in combination with the – –medium option.
• –h, – –help
Print the usage information for this FSE command.
• –v, – –version
Print the copyright and version information for this FSE command.
HP StorageWorks File System Extender Software CLI reference