HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)

2.4 NAME 27
2.4 NAME
fsecheck:
Perform an HSM file system consistency check against the File System Catalog
or a File System Catalog consistency check against the FSE media.
2.4.1 SYNOPSIS
fsecheck {–i | – –fsc–hsmfs} PartitionName
fsecheck {–m | – –fsc–media} {PartitionName | {–B | – –barcode} Barcode...
[{–V | – –volume} VolumeNumber...]} [– –autocorrect [– –match–media]]
fsecheck {–h | – –help}
fsecheck {–v | – –version}
2.4.2 DESCRIPTION
Each FSE command communicates with the FSE processes through the Manage-
ment Interface (fse–mif). To execute an FSE command, the Management Interface
must be running. If the connection to the Management Interface fails, check its
status by running the fse ––status command. In case the Management Interface
is not running, start it with the fse – –start command.
After a successful command execution fsecheck notifies the FSE administrator
with a suitable message, which is printed to the standard output stream (stdout).
If there was an error during the command execution, an appropriate error message
is printed to the standard error stream (stderr).
CHECKING FILE SYSTEM CATALOG CONSISTENCY fsecheck com-
mand creates a maintenance job on the specified FSE partition. The maintenance
job is executed by the corresponding Partition Manager and performs a File Sys-
tem Catalog consistency check. The process can perform two types of consistency
checks: it can either compare file entries which are present in File System Catalog
with Fast Recovery Information (FRI) on the corresponding FSE media, or com-
pare files on an HSM file system with entries in the corresponding File System
Catalog. It detects the situations, where:
HP StorageWorks File System Extender Software CLI reference