HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)

2.4 NAME 29

• –m, – –fsc–media

Perform a consistency check on the FSE partition PartitionName comparing

the corresponding File System Catalog against the associated FSE media.

For details on this process, see section CHECKING FILE SYSTEM CAT-

ALOG CONSISTENCY.

• – –autocorrect

Automatically correct errors discovered by the consistency check of File

System Catalog against corresponding FSE media. For details on this pro-

cess, see section CHECKING FILE SYSTEM CATALOG CONSIS-

TENCY. This option can only be used in combination with the – –fsc–

media option.

• – –match–media

Correct the errors by removing the entries that have been found only in the

File System Catalog and not in the Fast Recovery Information blocks on the

FSE media. This type of correction further synchronizes the FSC content

with the data actually present on the media. For details on this process,

see section CHECKING FILE SYSTEM CATALOG CONSISTENCY.

This option can only be used in combination with the – –autocorrect option.

• –B, – –barcode

Perform a consistency check on the FSE partition PartitionName comparing

corresponding File System Catalog against the FSE media speciﬁed in the

Barcode argument. For details on this process, see section CHECKING

FILE SYSTEM CATALOG CONSISTENCY. This option can only be

used in combination with the – –fsc–media option.

• Barcode...

A sequence of identiﬁers of the FSE media that are being checked. In most

cases, identiﬁers are numerical barcodes. With disk media, identiﬁers are

relative parts of the disk media mount points (for example: dm_001, dm_-

002). Note that the following limitations apply:

– media that are unavailable will not be processed.

– media that are speciﬁed in the command line must belong to the same

FSE partition. In the opposite case, the fsecheck command will fail.

HP StorageWorks File System Extender Software CLI reference