HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)
2.4 NAME 30
• –V, – –volume
Limit the consistency check to the FSE medium volumes listed in the
VolumeNumber argument. This option can only be used in combination
with the – –barcode option, and cannot be used if more than one medium is
specified in Barcode....
• VolumeNumber...
A non–negative integer value or a sequence of such values which repre-
sent(s) the position(s) of FSE medium volume(s) on the medium layout.
Note that the following limitation applies:
– medium volumes that are unavailable will not be processed.
• –h, – –help
Print the usage information for this FSE command.
• –v, – –version
Print the copyright and version information for this FSE command.
2.4.4 EXAMPLES
• Trigger a File System Catalog consistency check against HSM file system
of the FSE partition daily_reports:
fsecheck – –fsc–hsmfs daily_reports
• Trigger a File System Catalog consistency check against FSE media as-
signed to the FSE partition archive_part_32:
fsecheck – –fsc–media archive_part_32
• Trigger a File System Catalog consistency check against FSE media as-
signed to the FSE partition archive_part_45. Enable automatic correction:
fsecheck – –fsc–media – –autocorrect archive_part_45
• Trigger a File System Catalog consistency check against FSE media as-
signed to the FSE partition temp_partition. Enable extended automatic cor-
rection:
fsecheck – –fsc–media – –autocorrect ––match–media temp_partition
HP StorageWorks File System Extender Software CLI reference