HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)

2.7 NAME 49

2.7 NAME

fsejob:

Monitor execution of running FSE jobs. Show status of running FSE jobs. Man-

age running FSE jobs.

2.7.1 SYNOPSIS

fsejob {–l | ––list} [–M | – –migration] [–R | – –recall] [–A | – –admin] [–C |

– –recovery] [–T | – –maint] [PartitionName] [–D | – –detail]

fsejob {–t | – –status} JobID

fsejob {–a | – –abort} JobID...

fsejob {–p | – –priority} JobID {Number | {–I | – –incr} Number | {–D | – –

decr} Number}

fsejob {–h | – –help}

fsejob {–v | – –version}

2.7.2 DESCRIPTION

This FSE command monitors execution of FSE jobs. It is used to perform these

FSE administrator’s tasks:

• list running FSE jobs in whole FSE implementation or on a particular FSE

partition,

• show current status of an FSE job,

• abort execution of speciﬁed FSE jobs,

• change the priority of an FSE job.

Each FSE command communicates with the FSE processes through the Manage-

ment Interface (fse–mif). To execute an FSE command, the Management Interface

must be running. If the connection to the Management Interface fails, check its

status by running the fse ––status command. In case the Management Interface

HP StorageWorks File System Extender Software CLI reference