HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)

2.8 NAME 56

• show current status of the conﬁgured drives and slots in the operating FSE

library (barcodes of the media in drives and the media assigned to slots),

• update Resource Management Database with current status of the drives and

media in the operating FSE library,

• disable or enable operation of an FSE library.

Each FSE command communicates with the FSE processes through the Manage-

ment Interface (fse–mif). To execute an FSE command, the Management Interface

must be running. If the connection to the Management Interface fails, check its

status by running the fse ––status command. In case the Management Interface

is not running, start it with the fse – –start command.

After successful command execution fselibrary notiﬁes the FSE administrator

with a suitable message, which is printed to the standard output stream (stdout).

If there was an error during the command execution, an appropriate error message

is printed to the standard error stream (stderr).

2.8.3 OPTIONS

• –a, – –add

Conﬁgure a new FSE library with parameters, written in the conﬁgura-

tion ﬁle ConﬁgFileName. This action checks the validity of the conﬁgu-

ration ﬁle, copies the ﬁle to Conﬁguration Database and inserts the param-

eter values into Resource Management Database. FSE library names are

unique within the FSE implementation. If everything went ﬁne new Li-

brary Agent for this library is started afterward. Library Agent is one of

the conﬁguration–dependent FSE processes in the FSE implementation. It

is responsible for handling and interpreting requests addressed to the FSE

library.

• ConﬁgFileName

The name of the FSE library conﬁguration ﬁle to use.

• –r, – –remove

Remove an existing FSE library from the FSE implementation. This in-

cludes shutdown of Library Agent for this library and removal of all conﬁg-

uration ﬁle revisions of this FSE library from Conﬁguration Database. Note

HP StorageWorks File System Extender Software CLI reference