HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)

2.8 NAME 57
that unless additional option ––force is specified, the command demands
FSE administrator’s confirmation before performing this operation. Default
answer to the confirmation question is "No".
• Name
The name of the FSE library to manage configuration for.
• –F, – –force
Set forced mode for FSE library remove or disable operation. In this mode,
FSE administrator’s confirmation of FSE library removal or disabling is
skipped. The command treats it as if FSE administrator would have an-
swered the confirmation question with "Yes". This option can only be used
in combination with the – –remove or – –disable option.
• –s, – –show
If the argument RevisionNumber is specified, print the appropriate configu-
ration revision for the FSE library Name, otherwise print the configuration
revision in–use.
• RevisionNumber
A non–negative integer value which represents the configuration revision to
print.
• –H, – –history
Print configuration history depth for the FSE library Name. Configuration
history depth is the number of the configuration file revisions which are
stored in Configuration Database for this FSE library. This option can only
be used in combination with the – –show option.
• –m, – –modify
Modify the configuration of FSE library Name with the configuration file
ConfigFileName. This action checks the validity of the new configuration
file, copies it to Configuration Database as a new configuration revision and
triggers the FSE library reconfiguration. During reconfiguration its Library
Agent is temporarily disabled. It is shut down before reconfiguration and
restarted afterward.
HP StorageWorks File System Extender Software CLI reference