HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)

2.9 NAME 65

JOB PROGRESS MONITORING fsemedium is able to receive messages

from Management Interface to give the user ability to monitor the progress of

the command.

Monitoring is enabled by default and can be disabled by using the – –no–monitor

option.

When monitoring is enabled, fsemedium command reports events and other rel-

evant information from the FSE processes as long as the job that fsemedium has

started is running. After the job terminates, the command exits. If monitoring is

disabled, the command returns the control immediately after it has started a cor-

responding job. In this case no information from the job is received, even in case

of errors.

Monitoring can be cancelled by pressing

∧

C in the shell where fsemedium runs.

Note:

The job will continue to run and will write progress to the fse.log ﬁle.

2.9.3 OPTIONS

• –a, – –add

Add a new FSE medium with barcode Barcode to the FSE conﬁguration. If

additional option – –pool with the argument PoolName is speciﬁed, assign

this FSE medium to the speciﬁed FSE media pool. If this option is not

speciﬁed, the medium entry is added to the Resource Management Database

but the medium itself is left unassigned with its conﬁgurable parameters

unset.

Note:

FSE medium must be assigned to some FSE media pool, before it can

be used.

• Barcode

The identiﬁer of the FSE medium that is being managed. In most cases,

the identiﬁer is a numerical barcode. With disk medium, the identiﬁer is

the relative part of the disk medium mount point (for example: dm_001,

dm_002).

HP StorageWorks File System Extender Software CLI reference