HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)

2.9 NAME 67

Status information for an FSE medium volume includes:

1. Barcode .......... name of the corresponding FSE medium,

2. VolNum .......... index of the volume on medium,

3. Type .......... medium volume type (data, system),

4. Size[MB] .......... medium volume size (in MB),

5. Avail[MB] .......... current amount of volume free space (in MB),

6. Used[%] .......... percentage of currently occupied volume space,

7. Status .......... current medium volume status (empty, open, full, re-

covery, scanned, in reorg, recycled, error).

• –V, – –volume

There are four kinds of usage of this option in combination with other op-

tions:

– if the ––list option is speciﬁed, show status of all medium volumes on

the medium with the Barcode barcode, or status of the medium vol-

umes on all media conﬁgured in the FSE implementation (if Barcode

is omitted);

– if the ––init option is speciﬁed, initialize only medium volume(s)

VolumeNumber... (the medium has to be already formatted);

– if the ––recreate–fri option is speciﬁed, populate system volume on

the medium with Fast Recovery Information from this volume (if it is

closed);

– if the – –reorg option is speciﬁed, reorganize only medium volume(s)

with consecutive number(s) VolumeNumber....

• –D, – –detail

Retrieve additional FSE medium or FSE medium volume information and

display the retrieved data in the ParameterName: ParameterValue format

with each parameter in its own line.

If this option is used with the – –list option, the following additional infor-

mation is reported:

– LibName .......... name of the library the medium is located in,

HP StorageWorks File System Extender Software CLI reference