HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)
2.9 NAME 68
– SlotAddr .......... address of the library slot assigned to the medium,
– SlotType .......... type of the library slot assigned to the medium,
– DrvName .......... name of the drive the medium is loaded into (if any),
– SerialNo .......... medium serial number,
– BlockSize .......... block size used on FSE medium volumes on the
medium,
– SysVolSize .......... size of the system volume of the medium (if it
exists),
– CurVol .......... consecutive number of the medium volume on which
the medium tape is currently positioned,
– Key .......... internal RMDB key value assigned to the medium.
If this option is used with the – –list and – –volume options, the following
additional information is reported:
– UUID .......... universal unique identified of the medium volume,
– AccessNum .......... number of accesses to the data on the volume,
– WriteNum .......... number of writings to the volume,
– OwriteNum .......... number of overwritings of the data on the volume,
– InitTime .......... date and time of the last volume initialization event,
– AccessTime .......... date and time of the last volume access event,
– WriteTime .......... date and time of the last volume write event,
– OwriteTime .......... date and time of the last volume overwrite event,
– LastVer .......... date and time of the last volume verification event,
– ValidData .......... amount of the data on the volume that was treated
as valid by the reorganizational scan job (in MB, the value equals 0 if
the volume has not been scanned),
– TotalData .......... amount of the data on the volume (in MB).
• –f, – –format
Format a new or an already used FSE medium with barcode Barcode. If
additional option – –init is specified then the initialization of the medium
HP StorageWorks File System Extender Software CLI reference