HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)
2.10 NAME 79
6. SysAvail[MB] .......... total available space on all system volumes on the
FSE media in this media pool (in MB),
7. SysUsed[%] .......... percentage of the total used space on all system vol-
umes on the FSE media in this media pool,
8. #Good .......... number of "good" FSE media in this media pool (the media
whose status is not set to unreliable or unusable),
9. #Unusable .......... number of unusable FSE media in this media pool,
10. #Unreliable .......... number of unreliable FSE media in this media pool,
11. #Uninit .......... number of uninitialized FSE media in this media pool.
Partition states have the following meaning:
--------------------------------------------------------------------
| STATUS | HSM FS | PARTITION | PART. MANAGER | NORMAL |
--------------------------------------------------------------------
| ready | not mounted | enabled | running | yes |
| disabled | not mounted | disabled | not running | yes |
| recovery mode | not mounted | enabled | running | yes |
| mounted | mounted | enabled | running | yes |
| error | * | enabled | not running | no |
| unknown | * | * | * | no |
--------------------------------------------------------------------
∗ ... not relevant
Note:
Situations described by the lines with word no in the column NORMAL mean
that the FSE administrator’s intervention is necessary to restore the normal
FSE operation.
2.10.3 OPTIONS
• –a, – –add
Configure a new FSE partition with parameters, written in the configuration
file ConfigFileName. This action checks the validity of the configuration
HP StorageWorks File System Extender Software CLI reference