HP StorageWorks File System Extender Software V3.4 CLI reference (T3648-96013, October 2006)

2.1 NAME 9
• – –stop
As with the – –start option, the effects of this option depend on where the
fse command is executed.
If used on a consolidated FSE system, the – –stop option:
1. executes the pre–stop script, if it exists (see POST–START AND
PRE–STOP SCRIPTS for details on the pre–stop script),
2. unmounts all mounted HSM file systems (on Linux systems),
3. terminates the FSE operation shutting down all running FSE processes
(see FSE PROCESSES for details on FSE processes).
If used on FSE server in a distributed FSE system, it:
1. executes the pre–stop script, if it exists,
2. terminates the FSE server operation shutting down all running FSE
server processes (see FSE PROCESSES for details on FSE server
processes).
If used on FSE client in a distributed FSE system, it:
1. executes the pre–stop script, if it exists,
2. unmounts all mounted HSM file systems (on Linux systems),
3. terminates the FSE client operation shutting down all running FSE
client processes (see FSE PROCESSES for details on FSE client pro-
cesses).
• – –restart
This option has the same effect as a consecutive invocation of the fse ––stop
and fse – –start commands.
Note:
In a distributed or mixed FSE implementation, restarting the FSE pro-
cesses on FSE server requires restarting processes on particular FSE
client to allow normal operation of each FSE partition configured on
that client.
HP StorageWorks File System Extender Software CLI reference