FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-56
Enterprise Operating System Command Line Interface User Manual
config
config.security.fabricBinding.replacePending
Syntax replacePending
Purpose This command replaces the Pending FBML with the fabric binding
configuration that is currently loaded on the fabric.
Parameters This command has no parameters.
Command Example
Root> config security fabricBinding replacePending
config.security.fabricBinding.showActive
Syntax showActive
Purpose This command displays the fabric binding configuration (active
FBML) saved on the fabric. It performs the same function as
show.security.fabricBinding on page 2-180.
Parameters This command has no parameters.
Output This command displays the following fabric binding configuration
data:
Output Example The output from the config.security.fabricBinding.showActive
command displays as follows.
Domain 1 (20:30:40:50:60:70:8F:1A) (Local)
Domain 3 (00:11:22:33:44:55:66:77) (Unattached)
Domain 2 (88:99:AA:BB:CC:DD:EE:FF) (Attached)
Domain 14 (11:55:35:45:24:78:98:FA) (Attached)
Domain ID The domain ID of the FBML member. Valid
domain ID's range from 1 to 239.
WWN The world wide name (WWN) of the FBML
member in colon-delimited hexadecimal
notation.
Attachment
Status
Indicates whether the FBML member is Local,
Attached, or Unattached. For more information,
see Fabric Binding Membership Terminology on
page 2-51.