FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-57
config
config.security.fabricBinding.showPending
Syntax showPending
Purpose This command displays the pending FBML, which may not reflect
what is active on the fabric.
Parameters This command has no parameters.
Output The fabric binding configuration data is displayed as a table that
includes the following properties of the Pending FBML.
Output Example The output from the config.security.fabricBinding.showPending
command displays as follows.
Domain 1 (20:30:40:50:60:70:8F:1A) (Local)
Domain 3 (00:11:22:33:44:55:66:77) (Unattached)
Domain 2 (88:99:AA:BB:CC:DD:EE:FF) (Attached)
Domain 14 (11:55:35:45:24:78:98:FA) (Attached)
config.security.portBinding
The Port Binding CLI commands enable you to “bind” a specific
switch or director port to the WWN of an attached node, switch, or
director for exclusive communication.
config.security.portBinding.bound
Syntax bound portNumber portBindingState
Domain ID The domain ID of the FBML member. Valid
domain ID's range from 1 to 239.
WWN The world wide name (WWN) of the FBML
member in colon-delimited hexadecimal
notation.
Attachment
Status
Indicates whether the FBML member is Local,
Attached, or Unattached. For more information,
see Fabric Binding Membership Terminology on
page 2-51.