FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-59
config
Parameters This command has one parameter.
Command Example
Root> config security portBinding show 4
Output The port binding configuration date is displayed as a table that
includes the following properties.
Output Example The output from the config.security.portBinding.show command
displays as follows.
Port Number: 4
WWN Binding: Active
Bound WWN: AA:99:23:23:08:14:88:C1
config.security.portBinding.wwn
Syntax wwn portNumber boundWwn
Purpose This command configures the single device WWN to which a port is
bound.
portNumber Specifies the port number for which the port
binding configuration will be shown. Valid
values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
Port Number The port number.
WWN Binding The state of port binding for the specified port,
either active or inactive.
Bound WWN The WWN of the device that is bound to the
specified port. If this field is blank, no device
has been bound to the specified port.