FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-66
Enterprise Operating System Command Line Interface User Manual
config
config.security.switchBinding.deleteMember
Syntax deleteMember wwn
Purpose This command removes a member from the SBML. The user cannot
remove any member currently logged into the switch.
Parameters This command has one parameter:
Command Example
Root> config security switchBinding deleteMember
AA:99:23:23:08:14:88:C1
config.security.switchBinding.setState
Syntax setState switchBindingState
Purpose This command sets the switch binding state on the switch.
wwn Specifies the switch or N_Port device WWN of
the member to be removed from the SBML. The
value of the WWN must be in colon-delimited
hexadecimal notation (for example,
AA:00:AA:00:AA:00:AA:00). The user may also
enter all for this argument to clear the SBML
completely. Note that the user cannot clear a
WWN that is currently logged into the switch.