FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-67
config
Parameters This command has one parameter:
Command Example
Root> config security switchBinding setState allRestrict
config.security.switchBinding.show
Syntax show
Purpose This command displays the switch binding configuration.
Parameters This command has no parameters.
switchBindingState Sets the switch binding state for the switch.
Valid values are:
disable - Disable switch binding. Devices
(servers, storage, and other switches) are
allowed to connect to the switch without
restrictions.
eRestrict - Enable switch binding and restrict
E_Port connections. E_Ports are prevented
from forming ISL connections unless explicitly
identified in the SBML. F_Port connections are
allowed without restriction.
fRestrict - Enable switch binding and restrict
F_Port connections. Server and (or) storage
devices are prevented from forming F_Port
connections with the switch unless explicitly
identified in the SBML. E_Ports are allowed to
form ISL connections without restriction.
allRestrict - Enable switch binding and restrict
E_Port and F_Port connections. Both E_Ports
and F_Ports prohibit connections with all
devices unless explicitly identified in the
SBML.