FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-83
config
Parameters This command has one parameter.
Command Example
Root> config system description McDATA Intrepid 6064
Fibre Channel Director
config.system.location
Syntax location systemLocation
Purpose This command sets the system location attribute.
Parameters This command has one parameter.
Command Example
Root> config system location Everywhere
config.system.name
Syntax name systemName
Purpose This command sets the system name attribute.
Parameters This command has one required parameter.
Command Example
Root> config system name Joe’s Switch
config.system.show
Syntax show
systemDescription Specifies the new system description string for
the director or switch. The name can contain
0–255 characters.
systemLocation Specifies the new system location for the
director or switch. The location can contain
0–255 characters.
systemName Specifies the new system name for the director
or switch. The name can contain 0–24
characters.