FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-104
Enterprise Operating System Command Line Interface User Manual
perf
Output Example The output from the perf.errors command displays as follows.
Port 2
Statistic Count
----------- ----------
Prim Seq Err 753452
Disc Frms 351269
Inv Tx Wrds 2953184
CRC Errs 1842953
Delim Errs 2953184
Addr Id Errs 1842953
FrmsTooShrt 40059
perf.link
Syntax link portNumber
Purpose This command displays port link counters for a single port.
Parameters This command has one parameter.
Command Example
Root> perf link 2
Output The port link counter data is displayed as a table that includes the
following statistics.
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
Port The port number.
OLS In The number of offline sequences initiated by the
attached N_Port.
OLS Out The number of offline sequences initiated by
this director or switch port.
Reset In The number of link resets initiated by the
attached N_Port.