FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-109
perf
Output Example The output from the perf.openTrunking.show command displays as
follows.
Port Number: 1
Congestion Threshold (%): 56
Flows Rerouted To: 26739
Flows Rerouted From: 23987
Unresolved Congestion: Enabled
Backpressure: Disabled
Low BB Credit Threshold (%): 75 (default)
perf.openTrunking.unresCongestion
Syntax unresCongestion unresolvedCongestionState
Purpose This command configures the Unresolved Congestion state of the
OpenTrunking configuration. If the state is configured to be enabled,
an unresolved congestion entry is made to the Event Log and an
SNMP trap is generated if SNMP is configured.
Parameters This command has one parameter.
Command Example
Root> perf openTrunking unresCongestion 1
Backpressure The current enabled/disabled state of the
backpressure trunking feature. (The indicated
state applies to every port on the product.)
Low BB Credit
Threshold
The current threshold setting of the Low BB
Credit Threshold trunking feature. If the value
is a default value,
(default) is displayed next
to the percentage. (The indicated value applies
to every port on the product.)
unresolvedCongestionState This parameter can be set to enable or
disable the Unresolved Congestion
state of the OpenTrunking
configuration. Boolean 1 and 0 values
may also be substituted.