FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

xvi
Enterprise Operating System Command Line Interface User Manual
Preface
The publications listed in Related Publications provide considerable
information about both concepts and McDATA products.
Organization of This
Manual
This publication is organized as follows:
• Chapter 1, Introduction, provides an introduction and overview of
the Command Line Interface.
• Chapter 2, CLI Commands, describes the Command Line Interface
commands, including their syntax, purpose, and parameters, as
well as examples of their usage and any output that they
generate.
• Appendix A, Error Messages lists and explains error messages that
may appear while using the CLI.
• Appendix B, Commands and Corresponding Releases lists each
command in the CLI and the release in which the command was
added to the CLI.
•The Glossary defines terms, abbreviations, and acronyms used in
this manual.
•An Index is also provided.
Manual Updates Check the McDATA web site at www.mcdata.com for possible
updates or supplements to this manual.
Related Publications Other publications that provide additional information about the
products mentioned in this manual are:
• Configuration Backup and Restore Utility Installation and User Guide
(958-000370)
• Products in a SAN Environment - Planning Manual (620-000124)
• McDATA ED-5000 Director Element Manager User Manual
(620-000176)
• Intrepid 6064 Director Installation and Service Manual (620-000108)
• Intrepid 6140 and 6064 Directors Element Manager User Manual
(620-000172)
• Intrepid 6140 Director Installation and Service Manual (620-000157)
• E/OSn SNMP Support Manual (620-000226)
• SANpilot User Manual (620-000160)