FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-116
Enterprise Operating System Command Line Interface User Manual
perf
perf.thresholdAlerts
The perf.thresholdAlerts commands enable you to configure alerts
that notify you of specific conditions on your system.
You can configure a maximum of 16 threshold alerts, including both
counter threshold alerts (CTAs) and throughput threshold alerts
(TTAs). Each of these types of alerts have commands that are specific
to the alert type.
• Counter threshold alerts: These are alerts that are triggered by
counts of events. The commands used to configure these alerts
start with “perf.thresholdAlerts.counter”.
• Throughput threshold alerts: These alerts are triggered by port
throughput. The commands used to configure these alerts start
with “perf.thresholdAlerts.throughput”.
For a list of the available threshold alerts counters, see Alert Types and
Counters on page 2-118.
NOTE: The perf.thresholdAlerts commands are standard command line
interface features. They do not require a feature key.
Creating Threshold Alerts
The tasks you need to complete to create and activate a threshold
alert differ depending on the type of alert you are creating. To
implement a counter threshold alert, see Activating a Counter
Threshold Alert, below. To implement a throughput alert, see
Activating a Throughput Threshold Alert on page 2-117.
Activating a Counter Threshold Alert
In order to activate a counter threshold alert using the CLI, you must
enter certain commands in order. Enable the threshold alert using the
following order:
1. Create a counter threshold alert using the command
perf.thresholdAlerts.counter.addAlert on page 2-120. Use this
command to create a name for the threshold alert that you can use
in subsequent commands. The threshold alert must then be
configured using the other counter threshold alert commands.
2. Assign the threshold alert to a port using the command
perf.thresholdAlerts.counter.addPort on page 2-121.