FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-122
Enterprise Operating System Command Line Interface User Manual
perf
Parameters This command has the following parameters.
Specifying a port type removes all the ports from the alert and applies
the alert to each port that is the specified type of port. Valid values
are:
• eport
• fport
• flport (Sphereon 4300 and Sphereon 4500 only)
NOTE: A counter threshold alert is not allowed to specify both port types
and individual port numbers.
Command Example Root> perf thresholdAlerts counter addPort checklinks 12
perf.thresholdAlerts.counter.removePort
Syntax removePort name portNumber
Purpose This command removes a port from the specified counter threshold
alert.
name The name of a counter threshold alert as
defined by the command
perf.thresholdAlerts.counter.addAlert on
page 2-120.
portNumber Specifies the port number or port type. Valid
port number values:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
all applies the counter threshold alert to every
port on the product.