FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-136
Enterprise Operating System Command Line Interface User Manual
perf
Parameters This command has no parameters.
Command Example
Root> perf thresholdAlerts throughput showUtilTypeTable
Output Example The output from the
perf.thresholdAlerts.throughput.showUtilTypeTable command
displays as follows.
Number Utilization Type
------ ----------------------
1 Transmit Traffic (Tx)
2 Receive Traffic (Rx)
3 Both (Tx/Rx)
perf.traffic
Syntax traffic portNumber
Purpose This command displays port traffic counters for a specified port.
Parameters This command has one parameter.
Command Example
Root> perf traffic 2
Output The port traffic counter data is displayed as a table that includes the
following statistics, along with a wrap count for each corresponding
counter.
portNumber Specifies the port number. Valid values are:
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016 and 3216
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032 and 3232
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
Port The port number.
Rx% The received link utilization percentage.
Tx% The transmitted link utilization percentage.
RxFrames The number of Fibre Channel Class 2 and Class
3 frames that the port has received.