FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-140
Enterprise Operating System Command Line Interface User Manual
show
Output Example Date/Time Action Source User Id
---------- ----------- ------- -------------
11/24/03 04:18P Switch set online CLI 172.16.22.23
11/24/03 03:38P Switch name modifiedCLI 172.16.22.23
11/24/03 03:38P Switch set offline CLI 172.16.22.23
11/24/03 11:27A Firmware downloaded Web 172.60.5.40
show.epFrameLog.config
Syntax config
Purpose This command shows the current Embedded Frame Log settings
Parameters This command has no parameters.
Command Example
Root> show epFrameLog config
Output The output from this command displays the following data.
Output Example
Filter Class F Frames: Disabled
Filter Port: All
show.epFrameLog.filterClassFFrames
Syntax filterClassFFrames [enable]
Purpose This command will turn on or off the ability to filter out class-F
frames, or show its current state. When the filtering is enabled,
everything but class-F frames will be logged. This setting will not be
stored in NV RAM and will not persist after IML.
Filter Class F
Frames
The state for filtering of Class F frames.
Filter Port The port that is being filtered on.