FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-143
show
Output Example The output of the show.epFrameLog.nowrap command displays as
follows:
Count Date/Time Port # Direction SOF EOF Payload Size
------ --------------- ------ --------- --- --- ------------
39 11/24/03 11:30A 39 O i3 n 2112
Header: 22000026 000000EF E1000000 00000000 FFFF0000 00000000
PL: 00010203 04050607 08090A0B 0C0D0E0F 10111213 14151617 18191A1B 1C1D1E1F
38 11/24/03 11:30A 38 I i3 n 2112
Header: 22000026 000000EF E1000000 00000000 FFFF0000 00000000
PL: 00010203 04050607 08090A0B 0C0D0E0F 10111213 14151617 18191A1B 1C1D1E1F
37 11/24/03 11:30A 38 O i3 n 2112
Header: 22000025 000000EF E1000000 00000000 FFFF0000 00000000
PL: 00010203 04050607 08090A0B 0C0D0E0F 10111213 14151617 18191A1B 1C1D1E1F
show.epFrameLog.wrap
Syntax wrap [clear]
Purpose This command allows the user to view the contents of the wrapping
region of the FC2 frame log. The log entries will not persist IMLs or
power cycles, and will not be stored in NV RAM. This log will not
include entries for frames discarded by hardware, such as
un-routable class-3 frames unless class-3 discard is disabled in the
hardware.
NOTE: This log will begin to wrap after the log is filled.
Parameters This command has one optional parameter. If no parameter is
specified, then the 1000 entries of the log will be displayed.
Command Example
Root> show epFrameLog wrap
Output This command displays the following data.
clear Adding the optional 'clear' parameter
removes all entries from the log.
Count A constantly incrementing counter.
Date/Time Time of the frame.
Port # The port number.