FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-149
show
Output Example Principal Switch WWN: 00:00:00:00:00:00:00:00
show.fabric.topology
Syntax topology
Purpose This command displays a text description of the fabric. The principal
switch in the fabric will have a "*" next to it.
Parameters This command has no parameters.
Command Example
Root> show fabric topology
Output The features data is displayed as a table that includes the following
properties.
Output Example The output from the show.fabric.topology command displays as
follows.
Switch WWN DID OutPrt Remote WWN RemDID RemPrt
----------------------- --- ------ ----------------------- ------ ------
02:30:40:32:34:34:32:21* 2 24 24:45:73:49:05:43:22:11 10 2
25 24:45:73:49:05:43:22:11 10 3
26 24:45:73:49:05:43:22:11 10 4
24:45:73:49:05:43:22:11 10 2 02:30:40:32:34:34:32:21 2 24
3 02:30:40:32:34:34:32:21 2 25
4 02:30:40:32:34:34:32:21 2 26
21:23:21:25:76:43:23:21 10 7 02:30:40:32:34:34:32:21 15 3
02:30:40:32:34:34:32:21 15 3 21:23:21:25:76:43:23:21 10 7
Switch WWN The WWN of the switch at the local end of the
ISL.
DID Domain ID of the switch at the local end of the
ISL.
OutPrt The port number at the local end of the ISL.
Remote WWN The WWN of the switch at the remote end of the
ISL.
RemDID The domain ID of the switch at the remote end
of the ISL.
RemPrt The port number at the remote end of the ISL.