FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-161
show
Output The configuration data is displayed as a table that includes the
following properties:
Output Example
openSysMS State: disable
Host Control State: enable
show.openTrunking.config
Syntax config
Purpose This command displays the trunking configuration for all ports.
Parameters This command has no parameters.
Command Example
show openTrunking config
Output The device information data is displayed as a table that includes the
following properties.
openSysMS State The Open System Management Server
state.
Host Control
State
The Open System Management Server
Host Control state.
Unresolved
Congestion
The current enabled/disabled state of the
unresolved congestion trunking feature.
Backpressure The current enabled/disabled state of the
backpressure trunking feature.
Low BB Credit
Threshold
The current threshold setting of the low BB
credit threshold trunking feature listed as a
percentage. If this value is configured to be the
default,
(default) is displayed alongside the
threshold value. The default value is 75%.
Congestion
Threshold Table
A table mapping each port number on the
switch to a corresponding threshold setting.
The threshold is listed as a percentage. If this
value is configured to be the default,
(default)
is displayed alongside the threshold value. The
default value is 60%