FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-166
Enterprise Operating System Command Line Interface User Manual
show
Command and
Output Examples
The following examples show the output returned by the three
methods of specifying the show.port.exit command.
Output with single values for both parameters
Root> show port exit 21 10
Exit Port: 45
Output with destDomainId set to all
Root> show port exit all 15
Destination Domain Exit Port
------------------ ----------------
1 23
2 No Domain
3 23
…
31 No Domain
Output with sourcePort set to all
Root> show port exit 1 all
Source Port Exit Port
------------------ ----------------
0 No Source
1 5
2 No Source
3 6
…
show.port.info
Syntax info
Purpose This command displays port information for all ports.
Parameters This command has no parameters.
Command Example
Root> show port info