FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-172
Enterprise Operating System Command Line Interface User Manual
show
Output Example The output from the show.port.profile command displays as follows:
Port Number: 4
Name: Sam's tape drive
Blocked: False
Operating Type: FL Port
Operating Speed: 2 Gb/sec
Port WWN: A2:33:15:C3:3F:00:00:0A
Configured Type: Gx_Port
Configured Speed: Negotiate
Beaconing: Disabled
Port WWN Port WWN.
Configured Type Configured port type.
Configured Speed Configured port speed.
Beaconing Beaconing state.
FAN FAN state.
FC Address The Port Fibre Channel address.
Attached WWN The node WWN of the device at the
remote end of the link. A loop port will
display the first attached loop device.
Operational State The operational state of the port.
Reason The reason that the port operational state
is not “online”.
Rx BB Credits Then number of configured Rx BB
Credits.
Connector Type Optic connector type.
Transceiver Optic transceiver type.
Distance
Capability
Optic distance capability.
Media Type Optic media type.
Speed Capability Optic speed capability.
10G FC
Compliance
Optic 10G FC Compliance code.