FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
CLI Commands
2-173
show
FAN: Disabled
FC Address: 034FA2
Attached WWN: F0:01:02:A1:B0:22:00:12
Operational State: Online
Reason: None
Rx BB Credits: 12
Connector Type: LC
Transceiver: Long LC
Distance Capability: Long
Media Type: M-M 50um
Speed Capability: 2 Gb/sec
10G FC Compliance: None
show.port.showPortAddr
Syntax showPortAddr
Purpose This command displays the port address configuration for all ports.
NOTE: The config.port.showPortAddr on page 2-28 has functionality that is
identical to this command.
Parameters This command has no parameters.
Command Example
Root> show port showPortAddr
Output The port configuration is shown as a table of properties. The
following properties are displayed:
Port The port number
Original Addr The original port address of the port
Current Addr The current port address of the port
Swapped Port Num If the port is swapped with another port,
it will show the port number of the port it
is swapped with.