FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-174
Enterprise Operating System Command Line Interface User Manual
show
Output Example Port Original Addr Current Addr SwappedPort Num
---- ------------- ------------ ----------------
04 4
15 5
26 7 3
37 6 2
48 8
59 9
6a a
7b b
8c c
...
show.port.status
Syntax status
Purpose This command displays port status for all ports.
Parameters This command has no parameters.
Command Example
Root> show port status
Output The port status data is displayed as a table that includes the following
properties.
Port The port number.
State The port state (for example, Segmented E_Port,
Invalid Attachment, Not Installed, Online,
Offline, Not Operational, No Light, Testing,
Port Failure, Link Reset, or Inactive).
Type The operational port type. If the configured port
type is F_Port or E_Port, this value will match
the configured type. If the configured type is
G_Port, this value can be E_Port, F_Port, or
G_Port, depending on what is connected to the
port.
On the Sphereon 4300 and Sphereon 4500, if the
configured port type is Fx_Port, the operational
port type can include FL_Port in addition to the
values noted above for F_Port. If the configured
port type is Gx_Port, then the operational port
type can include FL_Port in addition to the
values noted above for G_Port.