FW 07.00.00/HAFM SW 08.06.00 McDATA Enterprise Operating System Command Line Interface User Manual (620-000134-720, April 2005)

2
2-176
Enterprise Operating System Command Line Interface User Manual
show
Output Example The output from the show.port.status command displays as follows.
Port State Type Attached WWN Beaconing Reason
---- ---------------- ----- ----------------------- --------- ------
0 Online fPort 10:00:80:00:11:22:33:44 Off
1 Online gPort 10:00:80:00:11:22:33:45 On
2 No Light fPort 10:00:80:00:11:22:33:55 On
3 Offline ePort 10:00:80:00:11:22:33:00 Off
4 Online gPort 10:00:80:00:11:22:33:57 Off
5 Port Failure fPort 10:00:80:00:11:22:33:46 Off
6 Link Reset gPort 10:00:80:00:11:22:33:63 Off
7 Segmented E_Port ePort 10:00:80:00:11:22:33:47 Off 02
8 Online ePort 10:00:80:00:11:22:33:88 Off
9 Offline fPort 10:00:80:00:11:22:33:49 Off
10 Inactive ePort 10:00:80:00:11:22:33:50 Off 26
11 Online fPort 10:00:80:00:11:22:33:53 Off
12 No Light fPort 10:00:80:00:11:22:33:56 Off
13 Online fPort 10:00:80:00:11:22:33:59 Off
14 Invalid Attachment fPort 10:00:80:00:11:22:33:64 Off 15
15 Online fPort 10:00:80:00:11:22:33:66 Off
02: Duplicate Domain ID(s)
03: Switch Speed Conflict
07: ISL connection not allowed on this port
Reason (cont.) If the operational state is Inactive only the
following messages can be generated:
• 24: Inactive - RC 0
• 25: No Serial Number
• 26: Feature Not Enabled
• 27: Switch Speed Conflict